Here’s my build of LineageOS 17.1 for Raspberry Pi 4 Model B, Pi 400, and Compute Module 4. It is unofficial and unsupported by the LineageOS team. It’s for advanced users only. Pi 4 model with at least 2GB of RAM is required to run this build.

Drivers Lineage Power Port Devices Download
Drivers Lineage Power Port Devices Free
Drivers Lineage Power Port Devices List

LineageOS 18.1 is a free, community built, aftermarket firmware distribution of Android 11 (R), which is designed to increase performance and reliability over stock Android for your device. Disclaimer #include /. Your. I'm having the same issues as mr573162. I have uninstalled device, changed every usb setting and port on computer, uninstalled and reinstalled google drivers from android studio and still no device/ adb when I click through Mata. Thanks in advance for any assistance. Download a custom recovery - you can download Lineage Recovery. Simply download the latest recovery file, named something like lineage-17.1-20210202-recovery-gta4xlwifi.img. Power off the device, and boot it into download mode: With the device powered off, hold Volume Down + Volume Up and connect USB cable to PC.

With integrated V BUS switch gate drivers (PMOS), this certified USB-C 1.4 Power Sinking Device can be supplied directly by V BUS. In this case, power is provided directly by the source, avoiding any leakage from local batteries when the USB-C port is not used.

Important! This image includes parts that are licensed under non-commercial license (Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International). You may use this build freely in personal/educational/etc use. Commercial use is not allowed with this build!

Do not mirror my builds! Please post a link to this page instead.

lineage-17.1-20210122-UNOFFICIAL-KonstaKANG-rpi4.zip
https://www.androidfilehost.com/?fid=17248734326145720259
md5:55cd5eb5eda5f9e33ce20cc763ef668c

Working:

Audio (HDMI, 3.5mm jack, USB microphones, bluetooth speakers/headsets, etc)
Audio DAC (using GPIO DACs e.g. Hifiberry DAC+)
Bluetooth
Camera (using official Pi camera modules & UVC USB webcams)
GPIO
GPS (using external USB modules e.g. U-Blox 7)
Ethernet
Hardware accelerated graphics (V3D)
HDMI display
I2C
IR remotes (using external GPIO IR modules e.g. TSOP4838)
RTC (using external GPIO I2C modules e.g. DS3231)
Sensors (using external GPIO I2C modules e.g. MPU6050, LSM6DS3 & LSM303DLHC accelerometer/gyroscope/magnetometer)
Serial console (using external GPIO serial console adapters e.g. PL2303)
SPI
Touchscreen/multi-touch (USB touchscreens, Waveshare SPI touchscreens, official 7” touchscreen using SwiftShader software renderer)
USB (mouse, keyboard, storage, etc)
USB-C (ADB, MTP, PTP, USB-tethering)
Wifi
Wifi tethering

Not working:

Hardware video decoding & encoding (software decoding & encoding works)

Issues: Download windows 10.

Stock camera app is not working - many third party camera apps seem to work
SELinux is in permissive mode
and more…

Drivers Lineage Power Port Devices Download

Sources:

Thanks:

Peter Yoon and everyone who has contributed to android-rpi
brobwind for bluetooth fixes
Roman Stratiienko and GloDroid project for graphics fixes
Eric Anholt for V3D graphics driver
Maxime Ripard for Pi 4 KMS driver
Google for Android Things platform
Android-x86 project
LineageOS team & everyone who has contributed to LineageOS 17.1

How to install:

Follow the official Raspberry Pi instructions for writing the image to the SD card (Linux, Mac, Windows).

FAQ:

Q: How to enable developer options?
A: Settings -> About tablet -> Click ‘Build number’ several times. You need to ‘drag’ the settings menu to reach the ‘About tablet’ section that is last on the list.

Q: How to enable root access?
A: You can enable root access under Settings -> System -> Developer options -> Root access. LineageOS no longer has built-in root management for applications. You should keep this option disabled at all times when you are not using an app that explicitly requires root access.

Q: How to enable local terminal application?
A: Settings -> System -> Developer options -> Local terminal

Q: How to enable advanced reboot options?
A: Settings -> System -> Developer options -> Advanced restart

Q: How to find several Raspberry Pi specific settings options?
A: Settings -> System -> Advanced settings

Most options in this menu require you to reboot your device for the setting to take effect.

Q: My display is not working. I can only see the rainbow screen but no Android boot animation. What should I do?
A: This build only supports HDMI displays that report supported resolutions using EDID. See this page under ‘Which values are valid for my monitor?’ to see how to check in Raspberry Pi OS which resolutions your display supports. 1920x1080 resolution is used by default with this build. You can try changing value in /boot/resolution.txt to use a different resolution that your display supports. Removing /boot/resolution.txt will try to use the preferred resolution for your display.

Q: Settings -> Storage shows total system size of 7 GB. There’s unallocated space on my sdcard. What should I do?
A: This is a 7 GB image, remaining space on your sdcard will remain unallocated. Easiest way to extend /data partition is to simply flash my resize zip in TWRP.

Alternative option is to use e.g. GParted and extend /data partition (/dev/block/mmcblk0p4) to cover the unallocated space. Resizing the partition manually will break support for encrypting /data. Format /data in TWRP recovery (Wipe -> Format data) after resizing to leave required space for crypto footer.

Q: I have official 7” LCD display and touchscreen. What should I do?
A: Official 7” touchscreen is only supported using SwiftShader software renderer. See below how to switch between different graphics drivers. You will also need to change display size under Settings -> Display -> Display size (or change ro.sf.lcd_density to 120 in /vendor/build.prop) to adapt to the smaller resolution.

Q: I need to use SwiftShader software renderer to use the official 7” display or I want to boot without any display connected. What should I do?
A: Warning, SwiftShader is a software renderer and using it affects graphics performance. You can switch between MESA and SwiftShader graphics drivers using a settings option found in Settings -> System -> Advanced settings -> Graphics drivers.

Also the previous method of executing following commands in ‘adb shell’/serial console/terminal still works:

Q: Raspberry Pi doesn’t have a power button. How to power off/reboot device?
A: Following keyboard keys work as Android buttons: F1 = Home, F2 = Back, F3 = Multi-tasking, F4 = Menu, F5 = Power, F11 = Volume down, and F12 = Volume up. You can also use one of many third party reboot applications.

Q: How to create a DIY hardware power button?
A: You can send power button events by connecting GPIO21 to ground.

You can enable the feature by using a settings option found in Settings -> System -> Advanced settings -> Power button.

Also the previous method of executing following commands in ‘adb shell’/serial console/terminal still works:

You can also use the DIY power button to boot the device to TWRP recovery. Press and hold the button while powering on the device until you see the TWRP screen.

Q: How to enable audio through 3.5mm jack?
A: You can enable the feature by using a settings option found in Settings -> System -> Advanced settings -> Audio device.

Also the previous method of executing following commands in ‘adb shell’/serial console/terminal still works:

Q: How to use IR remote?
A: You can enable the feature by using a settings option found in Settings -> System -> Advanced settings -> Infrared remote.

You can plac